直近表示から外れた情報を確認できます。診断結果とは別情報として扱います。
pnpm is a package manager. Prior to 10.34.4 and 11.7.0, a crafted patch entry could resolve outside the configured patches directory and cause pnpm patch-remove to delete an arbitrary reachable file. This vulnerability is fixed in 10.34.4 and 11.7.0.
LangSmith Client SDKs provide SDK's for interacting with the LangSmith platform. Prior to 0.8.18, an attacker who can send an HTTP request to a server running the LangSmith SDK's TracingMiddleware can cause that server to read an arbitrary file from its local filesystem and upload the contents to LangSmith as a trace attachment. Depending on how the distributed trace system is deployed, triggering a read may not require authentication. Retrieving the contents requires read access to the LangSmith workspace the traces are sent to. The net effect is a trust-boundary crossing: a party with workspace trace-read access (for example a low-privilege workspace member, a contractor, or a compromised teammate account) gains the ability to read files from any server running TracingMiddleware, a capability outside that workspace's intended trust boundary. This vulnerability is fixed in 0.8.18.
pydantic-settings provides settings management using Pydantic. From 2.12.0 until 2.14.2, NestedSecretsSettingsSource reads secret values from files in a configured secrets_dir. When secrets_nested_subdir=True, a directory entry inside secrets_dir that is a symbolic link pointing outside secrets_dir is followed, so files outside the configured directory are read into settings values. The same code path bypasses the documented secrets_dir_max_size protection. An attacker or lower-privileged component able to influence entries in the configured secrets directory (for example, a writable or shared secrets mount) can turn this into an unintended local file read into settings and can defeat the advertised loading-size cap. This vulnerability is fixed in 2.14.2.
OpenVPN version 2.6.0 through 2.6.20 and 2.7_alpha1 through 2.7.4 allows remote attackers to cause a denial of service via a malformed authentication token that triggers a reachable assertion when external-auth is enabled
Anti-Virus for ownCloud is an anti-virus application for file storage, synchronization, and sharing application ownCloud. Versions of Anti-Virus for ownCloud before 1.2.3 are vulnerable to Server-Side Request Forgery (SSRF). This corresponds to versions of ownCloud 10 prior to 10.15.3. Upgrade ownCloud 10 to version 10.15.3 or later or upgrade Anti-Virus for ownCloud 10 to version 1.2.3 or later to receive a fix.
ownCloud is a file storage, synchronization, and sharing application. In ownCloud 10 prior to version 10.15.3, an attacker with administrative privileges can exploit a path traversal vulnerability in the system to execute arbitrary code. Upgrade ownCloud 10 to version 10.15.3 or later to receive a patch.
SharePoint for ownCloud is an application for using SharePoint with the file storage, synchronization, and sharing application ownCloud Classic. In SharePoint for ownCloud prior to version 0.4.1, which corresponds to ownCloud 10 prior to 10.15.3, an attacker with administrative privileges can use a SSRF vulnerability in the SharePoint app to execute arbitrary code on the system. Upgrade ownCloud 10 to version 10.15.3 or later to receive SharePoint for ownCloud 0.4.1, the fixed version.
ownCloud Core is the server-side component of the file storage, synchronization, and sharing application ownCloud Classic. In versions prior to 10.15.3, the Updater on ownCloud 10 before 10.15.3 has an exposed dangerous method or function. Attackers with administrative privileges may leverage functionality to execute arbitrary code. This issue has been fixed in version 10.15.3.
A validation vulnerability has been identified in certain web features related to file management or upload in several products of the TAO 2.0 suite. This vulnerability could allow an attacker capable of interacting with the affected feature to attempt to access file system resources outside the scope intended by the application.
A flaw was found in GIMP's PNM file format parser. When parsing a specially crafted PNM file, the pnmscanner_gettoken() function writes a null terminator one byte past the end of a stack-allocated buffer due to an off-by-one error in the loop boundary check. This could lead to memory corruption, potentially resulting in denial of service or arbitrary code execution.
URL path injection in the Microsoft Graph adapter of Swoosh. Swoosh.Adapters.MsGraph builds its Microsoft Graph API request URL by interpolating the sender's email address into the URL path (/users/{from}/sendMail) without percent-encoding or validation. In applications that derive the from address from untrusted or user-influenced input (for example a relay, a contact form, or a "send as" feature), an attacker can place URL-special characters such as /, ?, or # in the local part of the address to escape the intended path segment and rewrite the path and query string of the request. Because the same authenticated POST is sent with the application's Microsoft Graph bearer token, the attacker can redirect it to other Graph endpoints within the token's scopes and control the request's query string. Applications that always use a fixed, trusted from address are not affected. This issue affects swoosh from 1.12.0 before 1.26.3.
A memory leak in OpenVPN version 2.5.0 through 2.5.11, 2.6.0 through 2.6.20 and 2.7_alpha1 through 2.7.4 allows remote attackers with a valid tls-crypt-v2 client key to potentially cause a denial of service
Imager::File::JPEG versions before 1.003 for Perl leak heap memory when reading a JPEG with repeated APP13 markers in i_readjpeg_wiol. i_readjpeg_wiol walks the marker list libjpeg returns and, for each APP13 marker, allocates a new buffer with *iptc_itext = mymalloc(...) and overwrites the previous pointer without freeing it. Only the final payload is later turned into a Perl scalar and freed, so a JPEG with N such markers leaks the first N-1 payloads on every read. In a long-lived process, such as an upload or thumbnailing service, repeated reads accumulate these leaks and exhaust available memory, a denial of service. The same handler ships bundled in the Imager distribution, where versions before 1.032 are affected and the fix ships in 1.032.
Imager versions before 1.032 for Perl have a heap out-of-bounds read in the bundled Imager::File::SGI reader via a 16-bit RLE literal run in read_rgb_16_rle. read_rgb_16_rle guards each literal run with if (count > data_left), but count is a pixel count while every 16-bit sample consumes two bytes. The copy loop reads inp[0] * 256 + inp[1] and advances two bytes per pixel, so a run with data_left / 2 < count <= data_left passes the guard yet consumes 2 * count bytes and reads past the end of the buffer. The 8-bit path is unaffected because there one pixel is one byte. Reading a crafted SGI image through Imager->read triggers the over-read before the parser rejects the malformed image, which can crash the process.
A vulnerability was identified in GPAC up to b40ce70f5. This issue affects the function sgpd_del_entry of the file src/isomedia/box_code_base.c of the component MP4Box. Such manipulation of the argument data leads to heap-based buffer overflow. Local access is required to approach this attack. The exploit is publicly available and might be used. The name of the patch is f29f955f2a3b5e8e507caad3e52319f961bf37bf. It is advisable to implement a patch to correct this issue.
A vulnerability was determined in GPAC up to 2.5-DEV. This vulnerability affects the function gf_isom_nalu_sample_rewrite of the file src/isomedia/avc_ext.c of the component MP4Box. This manipulation of the argument nalu_out_bs causes double free. It is possible to launch the attack on the local host. The exploit has been publicly disclosed and may be utilized. Patch name: f29f955f2a3b5e8e507caad3e52319f961bf37bf. To fix this issue, it is recommended to deploy a patch.
Untrusted Search Path vulnerability in B&R Industrial Automation GmbH APROL. This issue affects APROL: before R 4.4-01P5.
Improper certificate validation vulnerability in B&R Industrial Automation GmbH APROL. This issue affects APROL: before R 4.4-01P5.
Inefficient Algorithmic Complexity vulnerability in elixir-mint hpax allows unauthenticated denial-of-service via unbounded HPACK integer decoding. hpax decodes HPACK variable-length integers with no upper bound on the decoded value or the number of continuation octets. 'Elixir.HPAX.Types':decode_remaining_integer/3 accumulates the integer as int + (value <<< m), shifting by 7 more bits for each continuation octet and stopping only on a terminating octet or truncated input, never because the integer grew too large. Because BEAM integers are arbitrary precision, a run of N continuation octets builds an O(N)-bit bignum and re-adds into an ever-larger bignum on each step, so the total decoding cost is superlinear (about O(N^2)). An unauthenticated attacker who can send an HTTP/2 header block to a server using this decoder (reached through the 'Elixir.HPAX':decode/2 entry point) can supply a small header block that forces a large, attacker-controlled amount of CPU (and transient memory), a denial-of-service amplification. This issue affects hpax from 0.1.1 before 1.0.4.
Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint (Mint.HTTP1 module) allows a denial of service via an oversized chunked transfer-encoded response. This vulnerability is associated with program files lib/mint/http1.ex and program routines 'Elixir.Mint.HTTP1':decode_body/5, 'Elixir.Mint.HTTP1':add_body_to_buffer/2. When Mint decodes a chunked HTTP response body, it accumulates each partial fragment of the current chunk in the connection's data_buffer (an unbounded iolist) via add_body_to_buffer/2 and does not emit the data to the caller until the full declared chunk length has been received. The chunk size is taken directly from the server and parsed with no upper bound, so a malicious or compromised server can announce one enormous chunk (for example a size line of 7FFFFFFF, about 2 GiB) and then send the body bytes slowly without ever completing the chunk. The client buffers every received byte while it waits for a completion that never arrives, and because no data responses are produced until the chunk finishes, a caller that otherwise streams large content-length bodies safely gains no protection. An unauthenticated remote server (reachable whenever a client follows redirects, fetches user-supplied URLs, or processes webhooks) can drive the client's memory arbitrarily high and trigger an out-of-memory condition. This issue affects mint: from 0.5.0 before 1.9.1.
The throttling event handling mechanism in multiple WSO2 products accepts user-supplied JSON payloads without sufficient validation of their structure and content. This allows an unauthenticated remote attacker to inject malicious JSON data that can lead to a persistent denial of service condition. Successful exploitation of this vulnerability can disrupt the API Gateway, preventing legitimate API traffic from being processed and impacting complete service availability. The denial of service is persistent, requiring manual intervention to restore normal operations.
Apache Airflow's Google provider operators `GCSToSFTPOperator` and `GCSTimeSpanFileTransformOperator` joined GCS object names returned by the bucket listing API directly to a destination filesystem path without normalisation or containment check. A user with write access to the source GCS bucket (typically a different trust principal than the DAG author — partner uploads, ingest-only service accounts, public-data buckets) could create an object whose name contains `..` segments and cause the DAG run to write the downloaded blob outside the configured destination (the SFTP `destination_path` for `GCSToSFTPOperator`; the worker-local temp directory for `GCSTimeSpanFileTransformOperator`), enabling overwrite of arbitrary files on the SFTP server or the worker host. Affects deployments that ingest from buckets writable by less-trusted principals. Users are advised to upgrade to `apache-airflow-providers-google` 22.2.1 or later.
Improper Input Validation vulnerability in Apache Camel. This issue affects Apache Camel: from 4.8.0 through 4.18.2, from 4.19.0 through 4.20.0. Users are recommended to upgrade to version 4.18.3, 4.21.0, which fixes the issue.
Improper Input Validation vulnerability in Apache Camel. This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0. Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue.
Improper Input Validation vulnerability in Apache Camel. This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0. Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue.
Potential forgery of webhook requests when using a unauthenticated webhook in SUSE Rancher Fleet 0.15 before 0.15.2, 0.14 before 0.14.6, 0.13 before 0.13.11 and 0.12 before 0.12.5 could be used by remote attackers to cause a denial of service or a downgrade attack on other repositories on the system.
Missing filtering when the helmRepoURLRegex field isn't set on a GitRepo resource in SUSE Rancher Fleet's bundle reader in 0.15 before 0.15.2, 0.14 before 0.14.6, 0.13 before 0.13.11 and 0.12 before 0.12.15 forwards Helm authentication credentials (BasicAuth) to any URL specified in the helm.repo field of a fleet.yaml file, allowing attackers able to push to fleet monitored git repos to leak helm access credentials.
An authenticated user could manipulate a company ID parameter in a POST request to the backend to gain unauthorised access to other companies hosted within the same subdomain environment. The application does not adequately verify whether the requested company ID belongs to the authenticated user’s session, resulting in a cross-tenant authorisation bypass. If this vulnerability is successfully exploited, it allows unauthorised access to sensitive customer information, including billing data, and may enable the unauthorised modification of third-party data.
The software accepts user-supplied input via a URL parameter without adequate output encoding before reflecting it back to the user's browser. This condition allows an attacker to inject malicious script content into pages served by the application. By leveraging this weakness, an attacker can cause the user's browser to redirect to a malicious website, modify the UI of the webpage, or retrieve information from the browser. However, the impact is mitigated by the use of httpOnly flags on session-related cookies, preventing session hijacking.
A flaw was found in Red Hat Advanced Cluster Security for Kubernetes (RHACS). Central does not limit the depth of GraphQL queries served on the authenticated GraphQL API. An authenticated user with a valid API token can send deeply nested queries that cause excessive resource consumption in Central, resulting in a denial of service for the management plane.
Improper Input Validation vulnerability in Apache Camel AWS SNS component. The camel-aws2-sns component filters Camel headers through a component-specific HeaderFilterStrategy, Sns2HeaderFilterStrategy. Like the sibling Sqs2HeaderFilterStrategy, it originally configured only an outbound filter (setOutFilterPattern, which blocks Camel*, breadcrumbId and org.apache.camel.* headers from being written out) and did not configure an inbound filter rule. For the related camel-aws2-sqs component this inbound gap was exploitable, because the Sqs2Consumer maps inbound SQS message attributes into the Camel Exchange via HeaderFilterStrategy.applyFilterToExternalHeaders, allowing a message sender to inject Camel control headers (tracked as CVE-2026-46456). camel-aws2-sns, by contrast, is producer-only: Sns2Endpoint does not support consumers (createConsumer throws UnsupportedOperationException, 'You cannot receive messages from this endpoint'), so no externally-supplied message attributes are ever mapped inbound into a Camel Exchange through SNS, and the missing inbound filter rule on Sns2HeaderFilterStrategy was therefore not reachable by an attacker. As part of the same fix (CAMEL-23506), an inbound filter rule (setInFilterStartsWith for the Camel namespace) was added to Sns2HeaderFilterStrategy so that its configuration matches the corrected Sqs2HeaderFilterStrategy and the other sibling strategies. This is a defense-in-depth alignment with no known exploit path in camel-aws2-sns. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. This is a defense-in-depth hardening change with no known exploit path in camel-aws2-sns, which is producer-only, so no urgent action or workaround is required. Users who want the aligned behaviour can upgrade to version 4.21.0, or to 4.14.8 on the 4.14.x LTS releases stream, or to 4.18.3 on the 4.18.x releases stream, which contain the change. As a general best practice, operators should continue to apply least-privilege IAM permissions on their SNS topics.
Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Undertow Component. The camel-undertow HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false, whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks. In addition, for Rest DSL consumers the muteException option was not honoured at all: the RestUndertowHttpBinding was created with a hard-coded false, so the stack trace was returned even when muteException=true had been configured. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-undertow consumer (for example undertow: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.undertow.mute-exception=true property), so that processing errors no longer return the stack trace to the client; note that on affected releases this workaround does not cover Rest DSL consumers, whose binding ignores the option until the fix is applied.
Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Iggy component. The camel-iggy consumer mapped the user-headers of inbound Iggy messages into the Camel Exchange header map without applying any HeaderFilterStrategy (IggyFetchRecords copied the message user-headers straight into the Exchange). Because nothing blocked the Camel header namespace, an actor able to publish to the consumed Iggy stream/topic could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as message user-headers. In a route where the Iggy consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. This issue affects Apache Camel: from 4.17.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix adds a dedicated IggyHeaderFilterStrategy (and a headerFilterStrategy endpoint option) that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), restrict who can publish to the consumed Iggy stream/topic, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.
Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Atmosphere Websocket Component. The camel-atmosphere-websocket consumer mapped inbound WebSocket query parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (WebsocketConsumer.sendEventNotification() iterates the query-string map collected in WebsocketConsumer.service() and copies each entry into the Exchange). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the consumer apply the HeaderFilterStrategy it already inherits from the HTTP/servlet stack, filtering the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.
Improper Authentication, Missing Authentication for Critical Function, Not Failing Securely ('Failing Open') vulnerability in Apache Camel Keycloak Component. The KeycloakSecurityPolicy of camel-keycloak guards a route by running KeycloakSecurityProcessor.beforeProcess(), which performs three checks in sequence: it rejects a request that carries no access token, then - only if requiredRoles is non-empty - validates the roles, and - only if requiredPermissions is non-empty - validates the permissions. The actual cryptographic verification of the bearer access token (signature, issuer and expiry for a local JWT, or active-state and issuer for token introspection) is performed exclusively inside those role and permission checks. KeycloakSecurityPolicy defaults requiredRoles and requiredPermissions to empty - which is the documented 'Basic Setup' - so on a route configured that way the role and permission checks are skipped and the access token is therefore never verified. The token-presence check still rejects a missing token, but an invalid token is accepted: any non-null value in the Authorization: Bearer header - including an arbitrary string or a forged, unsigned JWT - passes the policy and the request reaches the protected route, with no signature, issuer or expiry check and no request to Keycloak. The token is read from the inbound request header because allowTokenFromHeader defaults to true. Because the normal reason to place a route behind this policy is that the route performs server-side work, the bypass results in unauthenticated access to that work; where the protected route forwards to a code-execution-capable producer, it can result in unauthenticated remote code execution. This defect is independent of CVE-2026-23552: that issue concerned the issuer claim and was fixed by adding a check inside the verification routine, but here the verification routine is not reached at all in the default configuration, so the defect remains. This issue affects Apache Camel: from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, configure a non-empty requiredRoles or requiredPermissions on every KeycloakSecurityPolicy so that the token-verification path is exercised, set allowTokenFromHeader to false where the token is not expected from the request header, or perform token verification at the framework layer ahead of the policy.
Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Netty HTTP component. The camel-netty-http HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false because the backing field was an uninitialised primitive boolean (Java's default of false), whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain (via DefaultNettyHttpBinding) instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-netty-http consumer (for example netty-http: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.netty-http.configuration.mute-exception=true property), so that processing errors no longer return the stack trace to the client.
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Salesforce Component. The camel-salesforce producer resolves its operation parameters - the SOQL query, the SOSL search, the target SObject name and id, the Apex REST URL and method, and the Apex query parameters - from Exchange message headers, reading the header in preference to the value configured on the endpoint (AbstractSalesforceProcessor.getParameter() reads the header first and uses the endpoint configuration only as a fallback). The control-header constants in SalesforceEndpointConfig (for example SOBJECT_QUERY = sObjectQuery, SOBJECT_SEARCH = sObjectSearch, SOBJECT_NAME = sObjectName, SOBJECT_ID = sObjectId, APEX_URL = apexUrl, APEX_METHOD = apexMethod, and the apexQueryParam. prefix) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a salesforce: producer, any HTTP client could therefore set these headers and override what the route intended - supplying its own SOQL query or SOSL search to read data from any SObject the connected Salesforce user can access, overriding the target SObject name and id for CRUD operations, or redirecting an Apex REST call to a different endpoint and HTTP method (including destructive methods) with injected query parameters. All such operations run with the full permissions of the Salesforce connected (integration) user, which is typically broad. No credentials are required from the attacker when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Salesforce operation parameters via the raw header names must use the CamelSalesforce* names (for example CamelSalesforceSObjectQuery and CamelSalesforceApexUrl) instead of the old sObject* / apex* values; the endpoint-option spelling is unchanged. For deployments that cannot upgrade immediately, strip the Salesforce control headers from any untrusted ingress before the salesforce: producer (for example removeHeaders('sObject*') and removeHeaders('apex*') at the start of the route), and set the query, SObject and Apex parameters from a trusted source.
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel Kafka Component. The camel-kafka producer can override its configured target topic at runtime from the kafka.OVERRIDE_TOPIC Exchange header: KafkaProducer.evaluateTopic() returns the header value in preference to the topic configured on the endpoint. The control-header constants in KafkaConstants (for example OVERRIDE_TOPIC = kafka.OVERRIDE_TOPIC, OVERRIDE_TIMESTAMP = kafka.OVERRIDE_TIMESTAMP, PARTITION_KEY = kafka.PARTITION_KEY) used plain, non-Camel-prefixed values. camel-kafka's own KafkaHeaderFilterStrategy does filter the kafka.* namespace, but only on the Kafka-to-Exchange serialization boundary (reading Kafka record headers into the Exchange, and writing Exchange headers into a Kafka record); it does not apply to headers that arrive from an upstream consumer in a multi-component route. The upstream HTTP consumer uses HttpHeaderFilterStrategy, which blocks only the Camel / camel namespace, so a kafka.* header passes through unfiltered. As a result, in a route that bridges an HTTP consumer (for example platform-http) into a kafka: producer, any HTTP client could set the kafka.OVERRIDE_TOPIC header and cause the message to be published to an arbitrary Kafka topic instead of the configured one - redirecting it to a sensitive internal topic, or injecting attacker-crafted messages into a topic consumed by a critical downstream service. The related kafka.OVERRIDE_TIMESTAMP and kafka.PARTITION_KEY headers could likewise be injected to backdate messages or target specific partitions. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set or read Kafka headers via the raw header names must use the CamelKafka* names (for example CamelKafkaOverrideTopic and CamelKafkaTopic) instead of the old kafka.* values. For deployments that cannot upgrade immediately, strip the kafka.* headers from any untrusted ingress before the kafka: producer (for example removeHeaders('kafka.*') at the start of the route), and set the target topic from a trusted source.
Improper Input Validation, Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection') vulnerability in Apache Camel IRC component. The camel-irc producer chooses the destination of an outgoing IRC message from the irc.sendTo Exchange header (the constant IrcConstants.IRC_SEND_TO, value irc.sendTo); when that header is present it overrides the channel list configured on the endpoint, and the message is sent only to the specified destination. This and the component's other control headers (irc.target, irc.messageType, irc.user.*, irc.num, irc.value) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into an irc: producer, any HTTP client could therefore set the irc.sendTo header and redirect a message that the route intended for a configured channel to an arbitrary IRC channel or user - exfiltrating the message content to an attacker-chosen nickname, leaking it into a public channel, or delivering messages that appear to come from the bot. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set IRC headers via the raw header names must use the CamelIrc* names (for example CamelIrcSendTo) instead of the old irc.* values. For deployments that cannot upgrade immediately, strip the irc.* headers from any untrusted ingress before the irc: producer (for example removeHeaders('irc.*') at the start of the route), and set the IRC destination from a trusted source.
Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel DAPR component. The camel-dapr Dapr Pub/Sub consumer (DaprPubSubConsumer) copied two fields from each inbound CloudEvent - its Pub/Sub component name and its topic - into the CamelDaprPubSubName and CamelDaprTopic Exchange headers. These two headers are producer-direction routing headers: when the route republishes through a Dapr producer, DaprConfigurationOptionsProxy reads them back and prefers them over the destination configured on the endpoint. As a result, in a route that consumes from one Dapr Pub/Sub topic and republishes to another (for example from('dapr-pubsub:p:t').to('dapr-pubsub:p:other')), an actor able to publish a message to the subscribed topic could set the CloudEvent's pub/sub-name and topic to values of their choosing and cause the re-published message to be delivered to an arbitrary Dapr Pub/Sub component and topic instead of the configured destination - redirecting or exfiltrating the message and bypassing the route's intended routing and any topic-level access controls in the underlying broker. Exploitation requires the ability to publish to the topic the route subscribes to; no other authentication or user interaction is needed. This issue affects Apache Camel: from 4.12.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, remove the CamelDaprPubSubName and CamelDaprTopic headers from the Exchange between the Dapr consumer and any Dapr producer in the route (for example removeHeaders('CamelDaprPubSubName', 'CamelDaprTopic')), and restrict who can publish to the subscribed Dapr Pub/Sub topic so that only trusted producers can send to it.
Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel JIRA component. The camel-jira producers read their operation parameters - the issue key, project key, transition id, summary, type, assignee, components, watchers, link type, work-log minutes and others - from Exchange message headers. The header constants defined in JiraConstants (for example ISSUE_KEY = IssueKey, ISSUE_PROJECT_KEY = ProjectKey, ISSUE_TRANSITION_ID = IssueTransitionId, LINK_TYPE = linkType) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a jira: producer, any HTTP client could therefore supply these headers and override the values the route intended, driving JIRA operations against the configured JIRA instance with the endpoint's configured service-account credentials - for example deleting or transitioning an arbitrary issue (via IssueKey / IssueTransitionId), creating an issue in a different project (via ProjectKey), modifying issue fields, adding or removing watchers, or logging work. The operations are bounded by what the configured service account is permitted to do. No credentials are required from the attacker when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive JIRA operations via the raw header names must use the CamelJira* names (for example CamelJiraIssueKey) instead of the old values. For deployments that cannot upgrade immediately, strip the camel-jira control headers from any untrusted ingress before the jira: producer (for example removing the IssueKey, ProjectKey, IssueTransitionId and related headers at the start of the route), and set the required JIRA operation parameters from a trusted source.
Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel DNS component. The camel-dns producers read DNS operation parameters - the resolver to query, the name or domain to look up, the record type and class, and the search term - from Exchange message headers whose constant values (DnsConstants.DNS_SERVER, DNS_NAME, DNS_DOMAIN, DNS_TYPE, DNS_CLASS, TERM) were the plain strings dns.server, dns.name, dns.domain, dns.type, dns.class and term. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a dns: producer, any HTTP client could therefore set the dns.server header to make the dig producer build a SimpleResolver pointing at an attacker-controlled DNS server - a server-side request forgery via DNS, through which the attacker observes the queried name and can return poisoned responses - and set the dns.name / dns.domain headers to resolve arbitrary internal hostnames, disclosing whether they exist (internal network reconnaissance). No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive DNS operations via the raw header names must use CamelDnsServer / CamelDnsName / CamelDnsDomain / CamelDnsType / CamelDnsClass / CamelDnsTerm instead of the dns.* / term names. For deployments that cannot upgrade immediately, strip the dns.* and term headers from any untrusted ingress before the dns: producer, and set the DNS server and lookup parameters from a trusted source in the route.
Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component. The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFS_OPERATION, GRIDFS_OBJECT_ID, GRIDFS_METADATA, GRIDFS_CHUNKSIZE, GRIDFS_FILE_ID_PRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs.* names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs.* headers from any untrusted ingress before the producer.
Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component. The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADER_PARAM_PREFIX / HEADER_FIELD_PREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam.* headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField.* headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam.* and SolrField.* headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route.
Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel in Vertx Websocket component. The camel-vertx-websocket consumer mapped inbound WebSocket query and path parameters into the Camel Exchange header map without applying any HeaderFilterStrategy (VertxWebsocketConsumer.populateExchangeHeaders()). Because nothing blocked the Camel header namespace, a client connecting to the WebSocket endpoint could set Camel-internal control headers - including CamelHttpUri (Exchange.HTTP_URI) - simply by supplying them as query parameters. In a route where the WebSocket consumer feeds a downstream HTTP producer, the injected CamelHttpUri redirects the server-side HTTP request to an attacker-chosen destination (server-side request forgery - for example to an internal service or a cloud metadata endpoint). In addition, the HTTP producer resolves Camel property placeholders on the resulting (attacker-controlled) URI, so placeholders embedded in the injected value - such as an environment-variable reference, an application property, or a vault reference - are resolved to their real values and sent to the attacker, disclosing environment variables, application properties and vault secrets. When the WebSocket endpoint is exposed without authentication, this is reachable by an unauthenticated remote attacker. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix makes the affected consumers apply a HeaderFilterStrategy that filters the Camel header namespace case-insensitively on inbound mapping, so externally-supplied Camel* / camel* headers are no longer copied into the Exchange. For deployments that cannot upgrade immediately, strip the Camel control headers from the inbound message before they reach any downstream producer (for example removeHeaders('Camel*') and removeHeaders('camel*') at the start of the route), require authentication on the WebSocket endpoint, and avoid bridging an untrusted consumer directly into an HTTP producer whose target URI can be driven from message headers.
Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component. The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATION_NAME / OPERATION_NAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route.
Improper Neutralization of Special Elements in Data Query Logic vulnerability in Apache Camel Neo4J component. The camel-neo4j producer builds the Cypher WHERE clause for its match/retrieve and delete operations from the CamelNeo4jMatchProperties map. CVE-2025-66169 addressed Cypher injection through the property values by binding them as query parameters ($paramN), but the property names (the JSON keys of that map) were still concatenated into the query string verbatim in Neo4jProducer.retrieveNodes() and deleteNode(). A property name containing Cypher syntax therefore alters the structure of the executed query. Where a route maps untrusted input into the CamelNeo4jMatchProperties map - for example by passing a request body as the match map, or from a consumer that does not filter inbound Camel* headers - an attacker who controls the JSON key names can inject arbitrary Cypher and read, modify or delete any node or relationship in the Neo4j database. The CamelNeo4jMatchProperties header is itself Camel-prefixed and is filtered by the HTTP header-filter strategy, so a plain HTTP client cannot set it directly; the issue is reachable through routes that deliberately or inadvertently carry untrusted data into that header. This issue affects Apache Camel: from 4.10.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, do not populate the CamelNeo4jMatchProperties map from untrusted input: validate or allow-list the property names (for example against ^[A-Za-z_][A-Za-z0-9_]*$) before the Neo4j producer, and ensure that any consumer feeding such a route filters inbound Camel* / camel* headers so the match header cannot be supplied by an external sender.
Deserialization of Untrusted Data vulnerability in Apache Camel PQC component. The camel-pqc component persists post-quantum key metadata (KeyMetadata) through pluggable KeyLifecycleManager implementations. HashicorpVaultKeyLifecycleManager and AwsSecretsManagerKeyLifecycleManager read that metadata back from the configured secret backend by deserializing a Base64-wrapped value with a raw java.io.ObjectInputStream.readObject() and no ObjectInputFilter or class allow-list; the cast to KeyMetadata happens only after readObject() returns, so any readObject() side effects in a crafted object run before the type check. The same unfiltered legacy-migration read also remained in FileBasedKeyLifecycleManager (for the stored KeyPair and KeyMetadata). A principal who can write to the operator-controlled backend that holds these values - the HashiCorp Vault KV path, or the AWS Secrets Manager secret (requiring a Vault token or secretsmanager:PutSecretValue) - could store a crafted serialized object that is deserialized during normal key-lifecycle operations, potentially leading to code execution in the context of the application that manages the keys. This is an incomplete-remediation follow-on to CVE-2026-40048 (CAMEL-23200), which changed FileBasedKeyLifecycleManager to store metadata as JSON / PKCS#8 / X.509 but did not add an ObjectInputFilter, did not cover the Vault and AWS sibling managers, and left FileBasedKeyLifecycleManager's own legacy-migration deserialization unfiltered. This issue affects Apache Camel: from 4.18.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, restrict write access to the key backend so that only the application's own identity can write the camel-pqc secrets (least-privilege HashiCorp Vault policies and secretsmanager:PutSecretValue IAM), and keep the PQC key material in a backend separate from any data that less-trusted principals can write.
Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Lucene Component. The camel-lucene producer reads the search phrase from an Exchange header (LuceneConstants.HEADER_QUERY) whose value was the plain string QUERY (and RETURN_LUCENE_DOCS for HEADER_RETURN_LUCENE_DOCS). Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that exposes a Lucene query operation behind an HTTP consumer (for example platform-http), any HTTP client could therefore set the QUERY header and have its value executed against the full-text index, overriding the query the route intended to run. Depending on what is indexed, this allows reading documents the request should not have access to (for example a match-all query returns the entire index, or the route's intended per-user filter can be replaced), and expensive regular-expression queries can consume significant CPU. No credentials are required when the HTTP consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set the query via the raw header name must use CamelLuceneQuery (and CamelLuceneReturnLuceneDocs) instead of QUERY / RETURN_LUCENE_DOCS. For deployments that cannot upgrade immediately, strip the attacker-controllable headers before the Lucene producer and set the query from a trusted source (for example removeHeader('QUERY') and removeHeader('RETURN_LUCENE_DOCS'), then setHeader('QUERY', constant(...)) at the start of the route).
Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel Mail Component. The camel-mail producer (MailProducer.getSender) scanned the outgoing Exchange for message headers in the mail.smtp. / mail.smtps. namespace and, when any were present, built a per-message JavaMail sender with those values applied as JavaMail session properties, overriding the endpoint configuration. This namespace is Camel-internal - only MailProducer interprets it - and was not blocked by any HeaderFilterStrategy, so the values could originate from any inbound protocol (for example platform-http query parameters or request headers, or JMS / Kafka messages from untrusted producers) that feeds a route ending in an smtp / smtps producer without an intervening removeHeaders. The maximal impact is version-dependent: on releases before 4.19.0, setting mail.smtp.host redirects the SMTP connection to a server under the attacker's control, and because the producer then authenticates with the endpoint's configured username and password those credentials are transmitted to the attacker; on 4.19.0 and later the producer connects to the endpoint's configured host explicitly, so the reachable impact is limited to weakening transport security (for example mail.smtp.ssl.trust, mail.smtp.starttls.enable or mail.smtp.socks.host) and interception of the outgoing message rather than host redirect. Exploitation requires a route that channels untrusted input into the mail producer without stripping the namespace. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0. Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the per-message override is disabled by default; enable it only on trusted endpoints with useJavaMailSessionPropertiesFromHeaders=true. For deployments that cannot upgrade immediately, strip the namespace before the mail producer with removeHeaders('mail.smtp.*') and removeHeaders('mail.smtps.*') between any untrusted ingress and the smtp / smtps producer. Even with the opt-in enabled, route authors should still strip the namespace on any path that carries untrusted input.